ACP Cladding Fitted to Your Building Front
Galaxy Facade executes ACP cladding and front elevation work in Tenkasi for shops, commercial buildings, and offices. Every project starts with a direct site inspection. We check wall levels, structural columns, window openings, and how your front elevation will look from the street.
ACP panels give a neat, durable finish on exterior walls, entrance pillars, and rooftop parapets. We plan sheet sizes, colour combinations, and panel grooves to match your building layout and budget without wasting material.
Commercial Facade and ACP Cladding Services
ACP cladding is our primary work. When a project also needs glass glazing, aluminium louvers, or WPC panels, we carry out the entire work together so every joint and edge lines up properly.
ACP Cladding & Front Elevation
We fix ACP sheets over sturdy aluminium tube framing to give commercial exteriors a straight, clean finish. We pay close attention to panel alignment, corner folds, and window flashing so the elevation stays weatherproof and neat.
Explore ACP Cladding →ACP Sheet Fabrication & Fitting
We groove, fold, and route panels to exact site measurements. Proper panel sizing keeps joint grooves straight and evenly spaced across the entire building wall.
Aluminium Framing & Louvers
We fabricate the aluminium sub-frame anchored with heavy-duty brackets to masonry walls. We also install aluminium louvers and fins for airflow, sun protection, or to screen rooftop equipment.
Structural Glass Glazing
Fixed glass facades and spider glazing work well for showroom displays and commercial entrances. We install glass framing flush with ACP panelling so the front elevation looks like one unified structure.
View glazing service →Canopy & Projected Highlights
We fabricate projected box frames, entrance canopies, and decorative fascia bands to give building fronts clean architectural depth.
ACP Elevation Work for Different Types of Buildings
Different commercial properties need different elevation treatments. A retail showroom needs large display areas, while an office building or factory needs clean wall coverage and durable panels.
Factories & Industrial Buildings
We clad administrative front blocks, security cabins, and factory gate entrances with durable ACP sheets that handle dust, sun, and weather.
Offices & Commercial Buildings
We combine ACP wall panels with glass entrance glazing to give office buildings a clean, professional exterior that welcomes clients.
Automobile Showrooms
For two-wheeler and car showrooms, we install brand-specific coloured ACP sheets on the upper fascia, side pillars, and entrance pylons.
Retail Shops & Showrooms
We finish shop fronts with smooth ACP panelling, leaving clean spaces for LED signboards and full-height glass displays.
Hospitals & Clinics
We install clean, low-maintenance ACP panels around reception entrances and exterior walls to give clinics and nursing homes a fresh look.
Commercial Rental Complexes
For commercial complexes with multiple shops, ACP panelling gives older brick exteriors a uniform, modern appearance that attracts good tenants.
Choosing the Right ACP Finish for Your Building
Selecting the right ACP sheet thickness, colour, and core depends on your building height and sunlight exposure. We help you choose materials that stay durable and keep their colour over time.
Checking wall condition
We inspect brickwork or plaster, locate solid columns for anchor fasteners, and check window openings before fixing frames.
Selecting sheet thickness & shade
We help you choose suitable sheet thickness (typically 3mm or 4mm for exterior walls), colour shades, and metallic, wooden, or matte finishes.
Planning grooves and corners
We calculate panel sizes so sheet joints look balanced across the wall, with properly folded corners and sealed silicone grooves.
Combining ACP, Glass, and Aluminium on One Building
Most modern commercial buildings combine multiple materials. ACP covers the main solid walls, glass provides showroom visibility, and aluminium louvers allow ventilation while shielding sunlight.
When planned and fabricated together, the junction between glass framing and ACP sheet edges can be weather-sealed and kept cleanly aligned.
Discuss Your FacadeWPC Wall Panels for Entrance Highlights
Wood-plastic composite (WPC) fluted panels add a natural wood-grain look to building entrances. Paired with plain or metallic ACP sheets, WPC makes entrance pillars and doorway walls stand out.
We suggest using WPC in key focus areas—such as entrance arches, porch soffits, or vertical accent bands—while keeping ACP for large wall areas.
See WPC exterior cladding →
How We Carry Out ACP Elevation Work
Every project follows these practical steps from preliminary measurements to site handover:
Site Visit & Measurement
We visit your project site in or around Tenkasi, take exact wall measurements, and check structural wall alignment.
Material Selection & Layout
We finalize sheet thickness, brand, colours, and the placement of glass or WPC panels with you.
Aluminium Sub-Framing
We fabricate the aluminium frame and anchor it firmly to the wall, checking plumb and level across every section.
Panel Fabrication & Fitting
We groove, fold, and mount the ACP panels to the frame, keeping even groove gaps and sealing joints with weather-resistant silicone.
Inspection & Handover
We inspect all panel lines, remove the protective film, clean the surfaces, and hand over the completed facade.
Why Work with Galaxy Facade on Your Building Front
Focused Facade Work
Exterior cladding and front elevation fabrication is our primary trade. We understand sheet behaviour, sub-framing, and joint weatherproofing.
Systematic Work Method
We manage the job in simple stages: site measurement, framework fabrication, panel routing, and site fitting.
All Materials Handled Together
We fit ACP, glass glazing, aluminium louvers, and WPC together so you do not have to coordinate between separate contractors.
Direct Contractor Communication
You speak directly with the team executing your work. We discuss wall dimensions, material grades, timelines, and costs openly.
ACP Cladding Work in Tenkasi & Nearby Towns
Galaxy Facade carries out ACP cladding and exterior elevation work across Tenkasi and surrounding towns, including Surandai, Alangulam, Pavoorchatram, Kadayanallur, and Puliangudi.
Send us your building location, rough wall dimensions, or a few photos. We will discuss what needs to be measured and help you select suitable materials.
ACP Elevation Work Across Tamil Nadu
If your building is outside Tenkasi, we also work on facade projects in other towns across southern Tamil Nadu. Check our location pages below:
Useful Guides for Planning Your Facade
Choosing panel colours, framing, and finishes brings up practical questions before work starts. Read our simple articles to get ideas for your building exterior.
Explore our facade articlesHave a Building in Tenkasi That Needs ACP Facade Work?
Share your building photos, wall measurements, or architectural drawings. We will provide a practical estimate and help plan your front elevation.
ACP Cladding From Design Planning to Site Installation
Design Planning & Material Selection
We help building owners in Tenkasi choose suitable ACP sheet thickness, colour shades, and frame layouts before starting fabrication. We discuss front signage areas, glass openings, and CNC cut features so the front elevation looks balanced and purposeful.
Panel Fabrication & Site Installation
Our fabrication team builds the aluminium framework on site, cuts and grooves each sheet to size, and fastens panels securely. All joints are aligned with consistent groove spacing and sealed with exterior silicone to protect against rain and dust.
What Our Customers Say About Galaxy Facade
These are genuine reviews shared by customers on our Google Business Profile.
Questions Customers Often Ask About ACP Facade Work
Simple, clear answers to common questions about planning facade work in Tenkasi.
What types of buildings do you do ACP cladding for in Tenkasi?
We work on retail shops, vehicle showrooms, commercial offices, hospitals, clinics, and industrial buildings across Tenkasi and neighbouring areas.
Does your ACP work include the aluminium framing?
Yes. Every ACP cladding job includes the complete aluminium sub-frame anchored to the masonry wall. We fix the framing with proper brackets around all windows, doors, and parapet edges.
Can I combine ACP cladding with front glass glazing?
Yes. Many commercial buildings combine ACP on the main walls with structural glass for shop fronts or lobbies. We plan both together so the glass frames and ACP panel grooves line up cleanly.
Do you take up facade work in towns near Tenkasi?
Yes. Along with Tenkasi town, we take up projects in Surandai, Alangulam, Pavoorchatram, Kadayanallur, Puliangudi, and nearby towns.
Do you install ACP for factories and showrooms?
Yes. We execute ACP cladding for factory administrative blocks, security gates, car and bike showrooms, and retail stores, planning panel lines around shutters and company signage.
How can I get an estimate for my building?
Fill in the enquiry form on this page or contact us on WhatsApp. Share your building location, rough wall dimensions, and a few photos of the site. We will review them and give you a clear initial estimate.
What details should I share when I get in touch?
Sharing your building location in or near Tenkasi, building type, approximate wall height and width, and site photos or drawings helps us give you practical material advice and cost details.
Start Your Project Enquiry
Share your project details with us. Upload photos or project documents, and we will contact you.